aboutsummaryrefslogtreecommitdiff
path: root/Minecraft.Client/Common/zlib/gzwrite.c
diff options
context:
space:
mode:
Diffstat (limited to 'Minecraft.Client/Common/zlib/gzwrite.c')
-rw-r--r--Minecraft.Client/Common/zlib/gzwrite.c1277
1 files changed, 700 insertions, 577 deletions
diff --git a/Minecraft.Client/Common/zlib/gzwrite.c b/Minecraft.Client/Common/zlib/gzwrite.c
index aa767fbf..79b04562 100644
--- a/Minecraft.Client/Common/zlib/gzwrite.c
+++ b/Minecraft.Client/Common/zlib/gzwrite.c
@@ -1,577 +1,700 @@
-/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_init OF((gz_statep));
-local int gz_comp OF((gz_statep, int));
-local int gz_zero OF((gz_statep, z_off64_t));
-
-/* Initialize state for writing a gzip file. Mark initialization by setting
- state->size to non-zero. Return -1 on failure or 0 on success. */
-local int gz_init(state)
- gz_statep state;
-{
- int ret;
- z_streamp strm = &(state->strm);
-
- /* allocate input buffer */
- state->in = (unsigned char *)malloc(state->want);
- if (state->in == NULL) {
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
-
- /* only need output buffer and deflate state if compressing */
- if (!state->direct) {
- /* allocate output buffer */
- state->out = (unsigned char *)malloc(state->want);
- if (state->out == NULL) {
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
-
- /* allocate deflate memory, set up for gzip compression */
- strm->zalloc = Z_NULL;
- strm->zfree = Z_NULL;
- strm->opaque = Z_NULL;
- ret = deflateInit2(strm, state->level, Z_DEFLATED,
- MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
- if (ret != Z_OK) {
- free(state->out);
- free(state->in);
- gz_error(state, Z_MEM_ERROR, "out of memory");
- return -1;
- }
- }
-
- /* mark state as initialized */
- state->size = state->want;
-
- /* initialize write buffer if compressing */
- if (!state->direct) {
- strm->avail_out = state->size;
- strm->next_out = state->out;
- state->x.next = strm->next_out;
- }
- return 0;
-}
-
-/* Compress whatever is at avail_in and next_in and write to the output file.
- Return -1 if there is an error writing to the output file, otherwise 0.
- flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH,
- then the deflate() state is reset to start a new gzip stream. If gz->direct
- is true, then simply write to the output file without compressing, and
- ignore flush. */
-local int gz_comp(state, flush)
- gz_statep state;
- int flush;
-{
- int ret, got;
- unsigned have;
- z_streamp strm = &(state->strm);
-
- /* allocate memory if this is the first time through */
- if (state->size == 0 && gz_init(state) == -1)
- return -1;
-
- /* write directly if requested */
- if (state->direct) {
- got = write(state->fd, strm->next_in, strm->avail_in);
- if (got < 0 || (unsigned)got != strm->avail_in) {
- gz_error(state, Z_ERRNO, zstrerror());
- return -1;
- }
- strm->avail_in = 0;
- return 0;
- }
-
- /* run deflate() on provided input until it produces no more output */
- ret = Z_OK;
- do {
- /* write out current buffer contents if full, or if flushing, but if
- doing Z_FINISH then don't write until we get to Z_STREAM_END */
- if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
- (flush != Z_FINISH || ret == Z_STREAM_END))) {
- have = (unsigned)(strm->next_out - state->x.next);
- if (have && ((got = write(state->fd, state->x.next, have)) < 0 ||
- (unsigned)got != have)) {
- gz_error(state, Z_ERRNO, zstrerror());
- return -1;
- }
- if (strm->avail_out == 0) {
- strm->avail_out = state->size;
- strm->next_out = state->out;
- }
- state->x.next = strm->next_out;
- }
-
- /* compress */
- have = strm->avail_out;
- ret = deflate(strm, flush);
- if (ret == Z_STREAM_ERROR) {
- gz_error(state, Z_STREAM_ERROR,
- "internal error: deflate stream corrupt");
- return -1;
- }
- have -= strm->avail_out;
- } while (have);
-
- /* if that completed a deflate stream, allow another to start */
- if (flush == Z_FINISH)
- deflateReset(strm);
-
- /* all done, no errors */
- return 0;
-}
-
-/* Compress len zeros to output. Return -1 on error, 0 on success. */
-local int gz_zero(state, len)
- gz_statep state;
- z_off64_t len;
-{
- int first;
- unsigned n;
- z_streamp strm = &(state->strm);
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return -1;
-
- /* compress len zeros (len guaranteed > 0) */
- first = 1;
- while (len) {
- n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
- (unsigned)len : state->size;
- if (first) {
- memset(state->in, 0, n);
- first = 0;
- }
- strm->avail_in = n;
- strm->next_in = state->in;
- state->x.pos += n;
- if (gz_comp(state, Z_NO_FLUSH) == -1)
- return -1;
- len -= n;
- }
- return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
- gzFile file;
- voidpc buf;
- unsigned len;
-{
- unsigned put = len;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return 0;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* since an int is returned, make sure len fits in one, otherwise return
- with an error (this avoids the flaw in the interface) */
- if ((int)len < 0) {
- gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
- return 0;
- }
-
- /* if len is zero, avoid unnecessary operations */
- if (len == 0)
- return 0;
-
- /* allocate memory if this is the first time through */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* for small len, copy to input buffer, otherwise compress directly */
- if (len < state->size) {
- /* copy to input buffer, compress when full */
- do {
- unsigned have, copy;
-
- if (strm->avail_in == 0)
- strm->next_in = state->in;
- have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
- copy = state->size - have;
- if (copy > len)
- copy = len;
- memcpy(state->in + have, buf, copy);
- strm->avail_in += copy;
- state->x.pos += copy;
- buf = (const char *)buf + copy;
- len -= copy;
- if (len && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
- } while (len);
- }
- else {
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* directly compress user buffer to file */
- strm->avail_in = len;
- strm->next_in = (z_const Bytef *)buf;
- state->x.pos += len;
- if (gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
- }
-
- /* input was all buffered or compressed (put will fit in int) */
- return (int)put;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputc(file, c)
- gzFile file;
- int c;
-{
- unsigned have;
- unsigned char buf[1];
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return -1;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* try writing to input buffer for speed (state->size == 0 if buffer not
- initialized) */
- if (state->size) {
- if (strm->avail_in == 0)
- strm->next_in = state->in;
- have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
- if (have < state->size) {
- state->in[have] = c;
- strm->avail_in++;
- state->x.pos++;
- return c & 0xff;
- }
- }
-
- /* no room in buffer or not initialized, use gz_write() */
- buf[0] = c;
- if (gzwrite(file, buf, 1) != 1)
- return -1;
- return c & 0xff;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputs(file, str)
- gzFile file;
- const char *str;
-{
- int ret;
- unsigned len;
-
- /* write string */
- len = (unsigned)strlen(str);
- ret = gzwrite(file, str, len);
- return ret == 0 && len != 0 ? -1 : ret;
-}
-
-#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#include <stdarg.h>
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
-{
- int size, len;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* make sure we have some buffer space */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* do the printf() into the input buffer, put length in len */
- size = (int)(state->size);
- state->in[size - 1] = 0;
-#ifdef NO_vsnprintf
-# ifdef HAS_vsprintf_void
- (void)vsprintf((char *)(state->in), format, va);
- for (len = 0; len < size; len++)
- if (state->in[len] == 0) break;
-# else
- len = vsprintf((char *)(state->in), format, va);
-# endif
-#else
-# ifdef HAS_vsnprintf_void
- (void)vsnprintf((char *)(state->in), size, format, va);
- len = strlen((char *)(state->in));
-# else
- len = vsnprintf((char *)(state->in), size, format, va);
-# endif
-#endif
-
- /* check that printf() results fit in buffer */
- if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
- return 0;
-
- /* update buffer and position, defer compression until needed */
- strm->avail_in = (unsigned)len;
- strm->next_in = state->in;
- state->x.pos += len;
- return len;
-}
-
-int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
-{
- va_list va;
- int ret;
-
- va_start(va, format);
- ret = gzvprintf(file, format, va);
- va_end(va);
- return ret;
-}
-
-#else /* !STDC && !Z_HAVE_STDARG_H */
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
- a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
- gzFile file;
- const char *format;
- int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
- a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
- int size, len;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that can really pass pointer in ints */
- if (sizeof(int) != sizeof(void *))
- return 0;
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* make sure we have some buffer space */
- if (state->size == 0 && gz_init(state) == -1)
- return 0;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return 0;
- }
-
- /* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
-
- /* do the printf() into the input buffer, put length in len */
- size = (int)(state->size);
- state->in[size - 1] = 0;
-#ifdef NO_snprintf
-# ifdef HAS_sprintf_void
- sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
- for (len = 0; len < size; len++)
- if (state->in[len] == 0) break;
-# else
- len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-# endif
-#else
-# ifdef HAS_snprintf_void
- snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
- len = strlen((char *)(state->in));
-# else
- len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
- a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
- a19, a20);
-# endif
-#endif
-
- /* check that printf() results fit in buffer */
- if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
- return 0;
-
- /* update buffer and position, defer compression until needed */
- strm->avail_in = (unsigned)len;
- strm->next_in = state->in;
- state->x.pos += len;
- return len;
-}
-
-#endif
-
-/* -- see zlib.h -- */
-int ZEXPORT gzflush(file, flush)
- gzFile file;
- int flush;
-{
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return -1;
- state = (gz_statep)file;
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return Z_STREAM_ERROR;
-
- /* check flush parameter */
- if (flush < 0 || flush > Z_FINISH)
- return Z_STREAM_ERROR;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* compress remaining data with requested flush */
- gz_comp(state, flush);
- return state->err;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzsetparams(file, level, strategy)
- gzFile file;
- int level;
- int strategy;
-{
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return Z_STREAM_ERROR;
-
- /* if no change is requested, then do nothing */
- if (level == state->level && strategy == state->strategy)
- return Z_OK;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- return -1;
- }
-
- /* change compression parameters for subsequent input */
- if (state->size) {
- /* flush previous input with previous parameters before changing */
- if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
- return state->err;
- deflateParams(strm, level, strategy);
- }
- state->level = level;
- state->strategy = strategy;
- return Z_OK;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_w(file)
- gzFile file;
-{
- int ret = Z_OK;
- gz_statep state;
-
- /* get internal structure */
- if (file == NULL)
- return Z_STREAM_ERROR;
- state = (gz_statep)file;
-
- /* check that we're writing */
- if (state->mode != GZ_WRITE)
- return Z_STREAM_ERROR;
-
- /* check for seek request */
- if (state->seek) {
- state->seek = 0;
- if (gz_zero(state, state->skip) == -1)
- ret = state->err;
- }
-
- /* flush, free memory, and close file */
- if (gz_comp(state, Z_FINISH) == -1)
- ret = state->err;
- if (state->size) {
- if (!state->direct) {
- (void)deflateEnd(&(state->strm));
- free(state->out);
- }
- free(state->in);
- }
- gz_error(state, Z_OK, NULL);
- free(state->path);
- if (close(state->fd) == -1)
- ret = Z_ERRNO;
- free(state);
- return ret;
-}
+/* gzwrite.c -- zlib functions for writing gzip files
+ * Copyright (C) 2004-2026 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* Initialize state for writing a gzip file. Mark initialization by setting
+ state->size to non-zero. Return -1 on a memory allocation failure, or 0 on
+ success. */
+local int gz_init(gz_statep state) {
+ int ret;
+ z_streamp strm = &(state->strm);
+
+ /* allocate input buffer (double size for gzprintf) */
+ state->in = (unsigned char *)malloc(state->want << 1);
+ if (state->in == NULL) {
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+
+ /* only need output buffer and deflate state if compressing */
+ if (!state->direct) {
+ /* allocate output buffer */
+ state->out = (unsigned char *)malloc(state->want);
+ if (state->out == NULL) {
+ free(state->in);
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+
+ /* allocate deflate memory, set up for gzip compression */
+ strm->zalloc = Z_NULL;
+ strm->zfree = Z_NULL;
+ strm->opaque = Z_NULL;
+ ret = deflateInit2(strm, state->level, Z_DEFLATED,
+ MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
+ if (ret != Z_OK) {
+ free(state->out);
+ free(state->in);
+ gz_error(state, Z_MEM_ERROR, "out of memory");
+ return -1;
+ }
+ strm->next_in = NULL;
+ }
+
+ /* mark state as initialized */
+ state->size = state->want;
+
+ /* initialize write buffer if compressing */
+ if (!state->direct) {
+ strm->avail_out = state->size;
+ strm->next_out = state->out;
+ state->x.next = strm->next_out;
+ }
+ return 0;
+}
+
+/* Compress whatever is at avail_in and next_in and write to the output file.
+ Return -1 if there is an error writing to the output file or if gz_init()
+ fails to allocate memory, otherwise 0. flush is assumed to be a valid
+ deflate() flush value. If flush is Z_FINISH, then the deflate() state is
+ reset to start a new gzip stream. If gz->direct is true, then simply write
+ to the output file without compressing, and ignore flush. */
+local int gz_comp(gz_statep state, int flush) {
+ int ret, writ;
+ unsigned have, put, max = ((unsigned)-1 >> 2) + 1;
+ z_streamp strm = &(state->strm);
+
+ /* allocate memory if this is the first time through */
+ if (state->size == 0 && gz_init(state) == -1)
+ return -1;
+
+ /* write directly if requested */
+ if (state->direct) {
+ while (strm->avail_in) {
+ errno = 0;
+ state->again = 0;
+ put = strm->avail_in > max ? max : strm->avail_in;
+ writ = (int)write(state->fd, strm->next_in, put);
+ if (writ < 0) {
+ if (errno == EAGAIN || errno == EWOULDBLOCK)
+ state->again = 1;
+ gz_error(state, Z_ERRNO, zstrerror());
+ return -1;
+ }
+ strm->avail_in -= (unsigned)writ;
+ strm->next_in += writ;
+ }
+ return 0;
+ }
+
+ /* check for a pending reset */
+ if (state->reset) {
+ /* don't start a new gzip member unless there is data to write and
+ we're not flushing */
+ if (strm->avail_in == 0 && flush == Z_NO_FLUSH)
+ return 0;
+ deflateReset(strm);
+ state->reset = 0;
+ }
+
+ /* run deflate() on provided input until it produces no more output */
+ ret = Z_OK;
+ do {
+ /* write out current buffer contents if full, or if flushing, but if
+ doing Z_FINISH then don't write until we get to Z_STREAM_END */
+ if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
+ (flush != Z_FINISH || ret == Z_STREAM_END))) {
+ while (strm->next_out > state->x.next) {
+ errno = 0;
+ state->again = 0;
+ put = strm->next_out - state->x.next > (int)max ? max :
+ (unsigned)(strm->next_out - state->x.next);
+ writ = (int)write(state->fd, state->x.next, put);
+ if (writ < 0) {
+ if (errno == EAGAIN || errno == EWOULDBLOCK)
+ state->again = 1;
+ gz_error(state, Z_ERRNO, zstrerror());
+ return -1;
+ }
+ state->x.next += writ;
+ }
+ if (strm->avail_out == 0) {
+ strm->avail_out = state->size;
+ strm->next_out = state->out;
+ state->x.next = state->out;
+ }
+ }
+
+ /* compress */
+ have = strm->avail_out;
+ ret = deflate(strm, flush);
+ if (ret == Z_STREAM_ERROR) {
+ gz_error(state, Z_STREAM_ERROR,
+ "internal error: deflate stream corrupt");
+ return -1;
+ }
+ have -= strm->avail_out;
+ } while (have);
+
+ /* if that completed a deflate stream, allow another to start */
+ if (flush == Z_FINISH)
+ state->reset = 1;
+
+ /* all done, no errors */
+ return 0;
+}
+
+/* Compress state->skip (> 0) zeros to output. Return -1 on a write error or
+ memory allocation failure by gz_comp(), or 0 on success. state->skip is
+ updated with the number of successfully written zeros, in case there is a
+ stall on a non-blocking write destination. */
+local int gz_zero(gz_statep state) {
+ int first, ret;
+ unsigned n;
+ z_streamp strm = &(state->strm);
+
+ /* consume whatever's left in the input buffer */
+ if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ return -1;
+
+ /* compress state->skip zeros */
+ first = 1;
+ do {
+ n = GT_OFF(state->size) || (z_off64_t)state->size > state->skip ?
+ (unsigned)state->skip : state->size;
+ if (first) {
+ memset(state->in, 0, n);
+ first = 0;
+ }
+ strm->avail_in = n;
+ strm->next_in = state->in;
+ ret = gz_comp(state, Z_NO_FLUSH);
+ n -= strm->avail_in;
+ state->x.pos += n;
+ state->skip -= n;
+ if (ret == -1)
+ return -1;
+ } while (state->skip);
+ return 0;
+}
+
+/* Write len bytes from buf to file. Return the number of bytes written. If
+ the returned value is less than len, then there was an error. If the error
+ was a non-blocking stall, then the number of bytes consumed is returned.
+ For any other error, 0 is returned. */
+local z_size_t gz_write(gz_statep state, voidpc buf, z_size_t len) {
+ z_size_t put = len;
+ int ret;
+
+ /* if len is zero, avoid unnecessary operations */
+ if (len == 0)
+ return 0;
+
+ /* allocate memory if this is the first time through */
+ if (state->size == 0 && gz_init(state) == -1)
+ return 0;
+
+ /* check for seek request */
+ if (state->skip && gz_zero(state) == -1)
+ return 0;
+
+ /* for small len, copy to input buffer, otherwise compress directly */
+ if (len < state->size) {
+ /* copy to input buffer, compress when full */
+ for (;;) {
+ unsigned have, copy;
+
+ if (state->strm.avail_in == 0)
+ state->strm.next_in = state->in;
+ have = (unsigned)((state->strm.next_in + state->strm.avail_in) -
+ state->in);
+ copy = state->size - have;
+ if (copy > len)
+ copy = (unsigned)len;
+ memcpy(state->in + have, buf, copy);
+ state->strm.avail_in += copy;
+ state->x.pos += copy;
+ buf = (const char *)buf + copy;
+ len -= copy;
+ if (len == 0)
+ break;
+ if (gz_comp(state, Z_NO_FLUSH) == -1)
+ return state->again ? put - len : 0;
+ }
+ }
+ else {
+ /* consume whatever's left in the input buffer */
+ if (state->strm.avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+
+ /* directly compress user buffer to file */
+ state->strm.next_in = (z_const Bytef *)buf;
+ do {
+ unsigned n = (unsigned)-1;
+
+ if (n > len)
+ n = (unsigned)len;
+ state->strm.avail_in = n;
+ ret = gz_comp(state, Z_NO_FLUSH);
+ n -= state->strm.avail_in;
+ state->x.pos += n;
+ len -= n;
+ if (ret == -1)
+ return state->again ? put - len : 0;
+ } while (len);
+ }
+
+ /* input was all buffered or compressed */
+ return put;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzwrite(gzFile file, voidpc buf, unsigned len) {
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return 0;
+ state = (gz_statep)file;
+
+ /* check that we're writing and that there's no (serious) error */
+ if (state->mode != GZ_WRITE || (state->err != Z_OK && !state->again))
+ return 0;
+ gz_error(state, Z_OK, NULL);
+
+ /* since an int is returned, make sure len fits in one, otherwise return
+ with an error (this avoids a flaw in the interface) */
+ if ((int)len < 0) {
+ gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
+ return 0;
+ }
+
+ /* write len bytes from buf (the return value will fit in an int) */
+ return (int)gz_write(state, buf, len);
+}
+
+/* -- see zlib.h -- */
+z_size_t ZEXPORT gzfwrite(voidpc buf, z_size_t size, z_size_t nitems,
+ gzFile file) {
+ z_size_t len;
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return 0;
+ state = (gz_statep)file;
+
+ /* check that we're writing and that there's no (serious) error */
+ if (state->mode != GZ_WRITE || (state->err != Z_OK && !state->again))
+ return 0;
+ gz_error(state, Z_OK, NULL);
+
+ /* compute bytes to read -- error on overflow */
+ len = nitems * size;
+ if (size && len / size != nitems) {
+ gz_error(state, Z_STREAM_ERROR, "request does not fit in a size_t");
+ return 0;
+ }
+
+ /* write len bytes to buf, return the number of full items written */
+ return len ? gz_write(state, buf, len) / size : 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputc(gzFile file, int c) {
+ unsigned have;
+ unsigned char buf[1];
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no (serious) error */
+ if (state->mode != GZ_WRITE || (state->err != Z_OK && !state->again))
+ return -1;
+ gz_error(state, Z_OK, NULL);
+
+ /* check for seek request */
+ if (state->skip && gz_zero(state) == -1)
+ return -1;
+
+ /* try writing to input buffer for speed (state->size == 0 if buffer not
+ initialized) */
+ if (state->size) {
+ if (strm->avail_in == 0)
+ strm->next_in = state->in;
+ have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
+ if (have < state->size) {
+ state->in[have] = (unsigned char)c;
+ strm->avail_in++;
+ state->x.pos++;
+ return c & 0xff;
+ }
+ }
+
+ /* no room in buffer or not initialized, use gz_write() */
+ buf[0] = (unsigned char)c;
+ if (gz_write(state, buf, 1) != 1)
+ return -1;
+ return c & 0xff;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputs(gzFile file, const char *s) {
+ z_size_t len, put;
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+
+ /* check that we're writing and that there's no (serious) error */
+ if (state->mode != GZ_WRITE || (state->err != Z_OK && !state->again))
+ return -1;
+ gz_error(state, Z_OK, NULL);
+
+ /* write string */
+ len = strlen(s);
+ if ((int)len < 0 || (unsigned)len != len) {
+ gz_error(state, Z_STREAM_ERROR, "string length does not fit in int");
+ return -1;
+ }
+ put = gz_write(state, s, len);
+ return len && put == 0 ? -1 : (int)put;
+}
+
+#if (((!defined(STDC) && !defined(Z_HAVE_STDARG_H)) || !defined(NO_vsnprintf)) && \
+ (defined(STDC) || defined(Z_HAVE_STDARG_H) || !defined(NO_snprintf))) || \
+ defined(ZLIB_INSECURE)
+/* If the second half of the input buffer is occupied, write out the contents.
+ If there is any input remaining due to a non-blocking stall on write, move
+ it to the start of the buffer. Return true if this did not open up the
+ second half of the buffer. state->err should be checked after this to
+ handle a gz_comp() error. */
+local int gz_vacate(gz_statep state) {
+ z_streamp strm;
+
+ strm = &(state->strm);
+ if (strm->next_in + strm->avail_in <= state->in + state->size)
+ return 0;
+ (void)gz_comp(state, Z_NO_FLUSH);
+ if (strm->avail_in == 0) {
+ strm->next_in = state->in;
+ return 0;
+ }
+ memmove(state->in, strm->next_in, strm->avail_in);
+ strm->next_in = state->in;
+ return strm->avail_in > state->size;
+}
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#include <stdarg.h>
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va) {
+#if defined(NO_vsnprintf) && !defined(ZLIB_INSECURE)
+#warning "vsnprintf() not available -- gzprintf() stub returns Z_STREAM_ERROR"
+#warning "you can recompile with ZLIB_INSECURE defined to use vsprintf()"
+ /* prevent use of insecure vsprintf(), unless purposefully requested */
+ (void)file, (void)format, (void)va;
+ return Z_STREAM_ERROR;
+#else
+ int len, ret;
+ char *next;
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're writing and that there's no (serious) error */
+ if (state->mode != GZ_WRITE || (state->err != Z_OK && !state->again))
+ return Z_STREAM_ERROR;
+ gz_error(state, Z_OK, NULL);
+
+ /* make sure we have some buffer space */
+ if (state->size == 0 && gz_init(state) == -1)
+ return state->err;
+
+ /* check for seek request */
+ if (state->skip && gz_zero(state) == -1)
+ return state->err;
+
+ /* do the printf() into the input buffer, put length in len -- the input
+ buffer is double-sized just for this function, so there should be
+ state->size bytes available after the current contents */
+ ret = gz_vacate(state);
+ if (state->err) {
+ if (ret && state->again) {
+ /* There was a non-blocking stall on write, resulting in the part
+ of the second half of the output buffer being occupied. Return
+ a Z_BUF_ERROR to let the application know that this gzprintf()
+ needs to be retried. */
+ gz_error(state, Z_BUF_ERROR, "stalled write on gzprintf");
+ }
+ if (!state->again)
+ return state->err;
+ }
+ if (strm->avail_in == 0)
+ strm->next_in = state->in;
+ next = (char *)(state->in + (strm->next_in - state->in) + strm->avail_in);
+ next[state->size - 1] = 0;
+#ifdef NO_vsnprintf
+# ifdef HAS_vsprintf_void
+ (void)vsprintf(next, format, va);
+ for (len = 0; len < state->size; len++)
+ if (next[len] == 0) break;
+# else
+ len = vsprintf(next, format, va);
+# endif
+#else
+# ifdef HAS_vsnprintf_void
+ (void)vsnprintf(next, state->size, format, va);
+ len = strlen(next);
+# else
+ len = vsnprintf(next, state->size, format, va);
+# endif
+#endif
+
+ /* check that printf() results fit in buffer */
+ if (len == 0 || (unsigned)len >= state->size || next[state->size - 1] != 0)
+ return 0;
+
+ /* update buffer and position */
+ strm->avail_in += (unsigned)len;
+ state->x.pos += len;
+
+ /* write out buffer if more than half is occupied */
+ ret = gz_vacate(state);
+ if (state->err && !state->again)
+ return state->err;
+ return len;
+#endif
+}
+
+int ZEXPORTVA gzprintf(gzFile file, const char *format, ...) {
+ va_list va;
+ int ret;
+
+ va_start(va, format);
+ ret = gzvprintf(file, format, va);
+ va_end(va);
+ return ret;
+}
+
+#else /* !STDC && !Z_HAVE_STDARG_H */
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzprintf(gzFile file, const char *format, int a1, int a2, int a3,
+ int a4, int a5, int a6, int a7, int a8, int a9, int a10,
+ int a11, int a12, int a13, int a14, int a15, int a16,
+ int a17, int a18, int a19, int a20) {
+#if defined(NO_snprintf) && !defined(ZLIB_INSECURE)
+#warning "snprintf() not available -- gzprintf() stub returns Z_STREAM_ERROR"
+#warning "you can recompile with ZLIB_INSECURE defined to use sprintf()"
+ /* prevent use of insecure sprintf(), unless purposefully requested */
+ (void)file, (void)format, (void)a1, (void)a2, (void)a3, (void)a4, (void)a5,
+ (void)a6, (void)a7, (void)a8, (void)a9, (void)a10, (void)a11, (void)a12,
+ (void)a13, (void)a14, (void)a15, (void)a16, (void)a17, (void)a18,
+ (void)a19, (void)a20;
+ return Z_STREAM_ERROR;
+#else
+ int ret;
+ unsigned len, left;
+ char *next;
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that can really pass pointer in ints */
+ if (sizeof(int) != sizeof(void *))
+ return Z_STREAM_ERROR;
+
+ /* check that we're writing and that there's no (serious) error */
+ if (state->mode != GZ_WRITE || (state->err != Z_OK && !state->again))
+ return Z_STREAM_ERROR;
+ gz_error(state, Z_OK, NULL);
+
+ /* make sure we have some buffer space */
+ if (state->size == 0 && gz_init(state) == -1)
+ return state->err;
+
+ /* check for seek request */
+ if (state->skip && gz_zero(state) == -1)
+ return state->err;
+
+ /* do the printf() into the input buffer, put length in len -- the input
+ buffer is double-sized just for this function, so there is guaranteed to
+ be state->size bytes available after the current contents */
+ ret = gz_vacate(state);
+ if (state->err) {
+ if (ret && state->again) {
+ /* There was a non-blocking stall on write, resulting in the part
+ of the second half of the output buffer being occupied. Return
+ a Z_BUF_ERROR to let the application know that this gzprintf()
+ needs to be retried. */
+ gz_error(state, Z_BUF_ERROR, "stalled write on gzprintf");
+ }
+ if (!state->again)
+ return state->err;
+ }
+ if (strm->avail_in == 0)
+ strm->next_in = state->in;
+ next = (char *)(strm->next_in + strm->avail_in);
+ next[state->size - 1] = 0;
+#ifdef NO_snprintf
+# ifdef HAS_sprintf_void
+ sprintf(next, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12,
+ a13, a14, a15, a16, a17, a18, a19, a20);
+ for (len = 0; len < size; len++)
+ if (next[len] == 0)
+ break;
+# else
+ len = sprintf(next, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11,
+ a12, a13, a14, a15, a16, a17, a18, a19, a20);
+# endif
+#else
+# ifdef HAS_snprintf_void
+ snprintf(next, state->size, format, a1, a2, a3, a4, a5, a6, a7, a8, a9,
+ a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+ len = strlen(next);
+# else
+ len = snprintf(next, state->size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+# endif
+#endif
+
+ /* check that printf() results fit in buffer */
+ if (len == 0 || len >= state->size || next[state->size - 1] != 0)
+ return 0;
+
+ /* update buffer and position, compress first half if past that */
+ strm->avail_in += len;
+ state->x.pos += len;
+
+ /* write out buffer if more than half is occupied */
+ ret = gz_vacate(state);
+ if (state->err && !state->again)
+ return state->err;
+ return (int)len;
+#endif
+}
+
+#endif
+
+/* -- see zlib.h -- */
+int ZEXPORT gzflush(gzFile file, int flush) {
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+
+ /* check that we're writing and that there's no (serious) error */
+ if (state->mode != GZ_WRITE || (state->err != Z_OK && !state->again))
+ return Z_STREAM_ERROR;
+ gz_error(state, Z_OK, NULL);
+
+ /* check flush parameter */
+ if (flush < 0 || flush > Z_FINISH)
+ return Z_STREAM_ERROR;
+
+ /* check for seek request */
+ if (state->skip && gz_zero(state) == -1)
+ return state->err;
+
+ /* compress remaining data with requested flush */
+ (void)gz_comp(state, flush);
+ return state->err;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzsetparams(gzFile file, int level, int strategy) {
+ gz_statep state;
+ z_streamp strm;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+ strm = &(state->strm);
+
+ /* check that we're compressing and that there's no (serious) error */
+ if (state->mode != GZ_WRITE || (state->err != Z_OK && !state->again) ||
+ state->direct)
+ return Z_STREAM_ERROR;
+ gz_error(state, Z_OK, NULL);
+
+ /* if no change is requested, then do nothing */
+ if (level == state->level && strategy == state->strategy)
+ return Z_OK;
+
+ /* check for seek request */
+ if (state->skip && gz_zero(state) == -1)
+ return state->err;
+
+ /* change compression parameters for subsequent input */
+ if (state->size) {
+ /* flush previous input with previous parameters before changing */
+ if (strm->avail_in && gz_comp(state, Z_BLOCK) == -1)
+ return state->err;
+ deflateParams(strm, level, strategy);
+ }
+ state->level = level;
+ state->strategy = strategy;
+ return Z_OK;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzclose_w(gzFile file) {
+ int ret = Z_OK;
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return Z_STREAM_ERROR;
+ state = (gz_statep)file;
+
+ /* check that we're writing */
+ if (state->mode != GZ_WRITE)
+ return Z_STREAM_ERROR;
+
+ /* check for seek request */
+ if (state->skip && gz_zero(state) == -1)
+ ret = state->err;
+
+ /* flush, free memory, and close file */
+ if (gz_comp(state, Z_FINISH) == -1)
+ ret = state->err;
+ if (state->size) {
+ if (!state->direct) {
+ (void)deflateEnd(&(state->strm));
+ free(state->out);
+ }
+ free(state->in);
+ }
+ gz_error(state, Z_OK, NULL);
+ free(state->path);
+ if (close(state->fd) == -1)
+ ret = Z_ERRNO;
+ free(state);
+ return ret;
+}
generated by cgit v1.2.3 (git 2.46.0) at 2026-03-21 23:09:35 +0000